Finding a reliable purlin manufacturer in Warangal usually means choosing between local traders reselling limited stock and factory-direct supply from a manufacturer. Kishore Infratech manufactures C purlins and Z purlins at our Jeedimetla, Hyderabad plant — web depths of 80–300 mm in 1.2–3 mm thickness, in bare, pre-galvanized GI, and hot-dip galvanized finishes — and delivers cut-to-length bundles across Warangal and the erstwhile district, including Hanamkonda, Kazipet, Jangaon, Parkal, and Mahabubabad, typically within 3–5 working days of order confirmation.
Quick Answer: Kishore Infratech supplies C purlins (web 80–300 mm) and Z purlins (web 150–300 mm) to Warangal factory-direct from Hyderabad — 1.2–3 mm thickness, flange 40–65 mm, lip 10–25 mm, cut to exact length. Options include bare MS, pre-galvanized GI (120/275 GSM per IS 277), and hot-dip galvanizing per IS 4759. Warangal sites are ~140–150 km from our Jeedimetla plant via NH-163, with typical delivery in 3–5 working days. Call 9440407852 for current prices.
C & Z Purlin Sizes Available for Warangal Buyers
Key takeaway: We roll-form C purlins with 80–300 mm web and Z purlins with 150–300 mm web, both in 40–65 mm flanges, 10–25 mm lips, and 1.2–3 mm thickness — covering everything from small poultry shed purlins to 12 m bay industrial roofs and solar mounting structures.
| Parameter | C Purlin | Z Purlin |
|---|---|---|
| Web depth (a) | 80 – 300 mm | 150 – 300 mm |
| Flange width (b) | 40 – 65 mm | 40 – 65 mm |
| Lip (c) | 10 – 25 mm | 10 – 25 mm |
| Thickness | 1.2 – 3.0 mm | 1.2 – 3.0 mm |
| Length | Cut to order | Cut to order |
| Typical use | Simply-supported bays, wall girts, solar structures | Continuous lapped roof runs, longer bays |
Not sure which profile your shed needs? Our engineering comparison of C purlin vs Z purlin sections explains when the overlapping Z profile beats the simpler C — in short, C purlins suit simply-supported spans and wall girts, while Z purlins allow lapped continuous runs over long roofs.
Coating Options: Bare, GI & Hot-Dip Galvanized
Key takeaway: For dry interior use, bare or primer-painted MS purlins are economical; for most Warangal agri and industrial sheds we recommend pre-galvanized GI (120 or 275 GSM zinc classes per IS 277); for high-humidity or chemical exposure — rice mill parboiling zones, cold storage plant rooms — specify hot-dip galvanizing per IS 4759, which is measured in microns, not GSM.
| Finish | Standard | Best For |
|---|---|---|
| Bare MS / primer painted | IS 2062 steel | Dry interiors, budget sheds, painted systems |
| Pre-galvanized GI (120 GSM) | IS 277 | General sheds, godowns, poultry structures |
| Pre-galvanized GI (275 GSM) | IS 277 | Solar mounting structures, longer service life |
| Hot-dip galvanized (post-fabrication) | IS 4759 (microns) | Rice mill wet zones, fertilizer godowns, 25+ year exposure |
GSM and microns are frequently confused in purlin quotations — traders sometimes quote “275 GSM hot-dip” which mixes two different standards. Our guide to hot-dip galvanizing: GSM vs microns explains exactly what to demand on your purchase order so you get the corrosion life you paid for.
What Warangal Projects Use Our Purlins
Key takeaway: Warangal’s purlin demand comes from four segments — paddy godowns and rice mill sheds across the Warangal–Parkal paddy belt, cold storage and chilli storage structures serving the Enumamula agri market, textile and industrial sheds around Kazipet and the mega textile park corridor, and solar mounting structures on rooftops and agricultural pump-sets. Each has a distinct purlin specification, and we stock-roll all of them.
- Agri godowns & warehouses: Z purlins in lapped runs for 20–24 m span godown roofs; GI finish for grain storage humidity.
- Rice mill sheds: hot-dip galvanized purlins in parboiling and dryer zones where steam attacks bare steel.
- EC poultry sheds: C purlins and wall girts sized for tunnel-ventilated shed profiles.
- Solar mounting structures: 275 GSM GI C/Z sections for rooftop and ground-mount arrays — see our solar mounting structure manufacturing range.
- Industrial & commercial sheds: full PEB packages where purlins arrive as part of the engineered building kit.
Delivery to Warangal: Logistics & Lead Time
Key takeaway: Our plant is in Jeedimetla, Hyderabad — roughly 145 km from Warangal city via NH-163, which means single-day trucking to any site in the district. Standard orders dispatch in 3–5 working days; cut-to-length bundles arrive strapped and tagged bay-wise so site teams can lift them directly to the roof without re-sorting.
| Delivery Area | Distance from Plant | Typical Transit |
|---|---|---|
| Jangaon | ~90 km | Same day |
| Warangal / Hanamkonda / Kazipet | ~145 km | Same day |
| Parkal | ~170 km | Same day |
| Mahabubabad / Bhupalpally | ~185–200 km | Next day |
Factory-Direct vs Local Trader: What Warangal Buyers Should Compare
Key takeaway: Local steel traders in Warangal stock a handful of common purlin sizes in fixed lengths — buying factory-direct gets you the exact web depth and thickness your design calls for, cut to length (no wastage on site), with mill test certificates and a single point of accountability for coating quality.
| Factor | Factory-Direct (KIPL) | Local Trader Stock |
|---|---|---|
| Size availability | Any web 80–300 mm, any thickness 1.2–3 mm | 3–4 common sizes only |
| Length | Cut to exact bay length | Fixed stock lengths, site cutting & wastage |
| Test certificates | Mill TC + coating certificate | Rarely available |
| Coating verification | Specified GSM / micron class on PO | “Galvanized” without class |
| Engineering support | Purlin sizing for span, spacing & wind load | None |
Need Purlins in Warangal?
Get Factory-Direct Prices Today.
Share your requirement — our team calls you back within 24 hours with current C & Z purlin rates and a delivery schedule to your site.
- C purlins 80–300 mm, Z purlins 150–300 mm, 1.2–3 mm thick
- Cut-to-length, bay-tagged bundles — zero site wastage
- Bare, GI (IS 277) & hot-dip galvanized (IS 4759) options
- Direct dispatch from our Jeedimetla, Hyderabad plant to Warangal
- 45+ years steel fabrication, 700+ projects delivered
Prefer to speak directly? Call 9440407852
Thank You!
Our team will call you back shortly with current purlin rates and delivery schedule.
Want a faster response?
📱 Chat with us on WhatsAppWhy Warangal Builders Choose Kishore Infratech
Kishore Infratech Private Limited (KIPL), an ISO 9001:2015 certified PEB manufacturer headquartered in Hyderabad, Telangana, with 45+ years of steel fabrication experience and 700+ completed projects, roll-forms C and Z purlins in-house at our Jeedimetla plant — the same sections we use in our own pre-engineered buildings, godowns, poultry sheds, and solar mounting structures across Telangana.
Based on our experience supplying steel structures across the Warangal–Hanamkonda–Jangaon belt, the most common purlin failure is not steel quality but wrong specification — undersized webs on long bays, or bare sections in humid grain-storage environments. Because we engineer buildings and not just sections, every purlin order can be checked against your span, purlin spacing, and IS 875 wind zone before it goes on the truck.
- In-house roll-forming — no reselling, factory-direct pricing
- C purlins 80–300 mm, Z purlins 150–300 mm, thickness 1.2–3 mm
- Bare, pre-galvanized GI (IS 277) and hot-dip galvanized (IS 4759) options
- Cut-to-length, bay-tagged bundles — zero site wastage
- Free purlin sizing check against span, spacing and wind load
- Single-day trucking to Warangal via NH-163
What purlin sizes are available for delivery to Warangal?
Kishore Infratech supplies C purlins with 80–300 mm web and Z purlins with 150–300 mm web, both with 40–65 mm flanges, 10–25 mm lips, and 1.2–3 mm thickness, cut to your exact bay length and delivered across Warangal in 3–5 working days.
What is the price of C and Z purlins in Warangal?
Purlin prices track steel coil rates and change frequently, so we quote current factory-direct rates on request rather than publishing stale numbers. Price depends on section size, thickness, coating class, and quantity — call 9440407852 for today’s rate for your specification.
Should I buy C purlin or Z purlin for my godown roof?
For godown roofs with continuous multi-bay runs, Z purlins are usually better because they lap over supports and act as a continuous beam, allowing longer bays or lighter sections. C purlins suit simply-supported single bays, wall girts, and solar mounting structures.
What is the difference between GI purlin and hot-dip galvanized purlin?
Pre-galvanized GI purlins are roll-formed from zinc-coated coil (classes like 120 or 275 GSM per IS 277) with cut edges left bare, while hot-dip galvanized purlins are dipped after fabrication per IS 4759, coating every edge and hole, and are measured in microns. HDG suits wet or chemical exposure like rice mill parboiling zones.
How long does purlin delivery to Warangal take?
Standard orders dispatch from our Jeedimetla, Hyderabad plant in 3–5 working days and reach Warangal the same day by road — the city is roughly 145 km via NH-163. Urgent part-loads can often be clubbed with other Telangana deliveries faster.
Do you supply purlins for solar mounting structures in Warangal?
Yes — 275 GSM pre-galvanized GI C and Z sections for rooftop, ground-mount, and agricultural pump-set solar structures are a core product line, along with complete solar mounting structure kits with base plates and clamps.
What purlin thickness is needed for a 6 m bay shed?
Most 6 m bay industrial sheds in the Telangana wind zone use 2–2.5 mm thick Z purlins of 200–250 mm web at 1.2–1.5 m spacing, but the correct answer depends on roof load, sheeting weight, and IS 875 wind pressure at your site — we check sizing free with every enquiry.
Can I get purlins cut to exact length?
Yes — every order is roll-formed and cut to your bay-wise cutting list, punched for cleat holes if drawings are provided, and bundled with bay tags so erection teams can lift bundles straight to position with no site cutting or wastage.
Do you provide material test certificates with purlin supply?
Yes — every dispatch includes the steel mill test certificate and the coating class (GSM per IS 277 or microns per IS 4759) stated on the invoice, so your purchase order specification is verifiable on delivery.
Do you supply complete PEB sheds in Warangal or only purlins?
Both — purlins can be bought as loose supply for your fabricator, or as part of a complete engineered PEB package (frames, purlins, sheeting, and erection) for godowns, rice mill sheds, poultry sheds, and industrial buildings anywhere in Warangal and surrounding districts.
Data methodology: Section ranges reflect Kishore Infratech Private Limited’s current roll-forming capability at Jeedimetla, Hyderabad; coating standards per IS 277 (pre-galvanized GI, GSM classes) and IS 4759 (hot-dip galvanizing, microns); distances are approximate road distances via NH-44. Purlin prices track steel coil rates — always confirm current rates before ordering.
Conclusion
If you’re comparing purlin manufacturers in Warangal, the checklist is short: exact section sizes (not nearest stock), stated coating class on the invoice, cut-to-length supply, test certificates, and a manufacturer who can verify your purlin sizing against span and wind load. Factory-direct supply from Hyderabad delivers all five, usually at a better landed cost than trader stock once site wastage is counted.
Need C or Z purlins in Warangal, Hanamkonda, Kazipet, or Jangaon? Call Kishore Infratech at 9440407852 or visit kishoreindustries.in for today’s factory-direct rates and a free sizing check.
